0

Total Items 0

  • Email: info@cem-instruments.in
  • Phone: +91-33-22151376 / 22159759

Coating Thickness Meter


Coating Thickness Tester

DT-156

This compact & handy Professional Gauge is designed for non-destructive, fast and highly accurate/precise coating thickness measurement. The principal applications lie in the field of corrosion protection. Ideal for manufacturer, offices & specialist advisers, paint shops & electroplaters, chemical, automobile, shipbuilding and aircraft industries including light & heavy engineering.

DT-156 gauge are suitable for laboratory, workshop & outdoor use. It works either on magnetic induction principle and on eddy current principle, depends on probe used. DT-156 uses only 1 probe for both ferrous & non-ferrous metal substrates. Probe can be selected manually or automatically.

Stores 400 memory values and display 5 statistics (AVG, MAX, MIN, S.DEV and Number of reading in work mode). It comes with software CD and USB cable for transferring collected data to computer for later analysis or data printing.

  • Non-magnetic coatings (e.g. paint, zinc) on steel
  • Insulating coatings (e.g. paint, anodizing coatings) on no-ferrous metals
  • Non-ferrous metals coatings on insulating substrates
  • Easy MENU operation system
  • Statistics Display : AVG, MAX, MIN, S.DEV and Number of readings in work mode
  • Two measuring mode : CONTINUOUS and SINGLE mode
  • Two Working modes: DIRECT and GROUP
  • One Point Calibration, two point calibration and basic easy calibration
  • High and Low Alarm Settings
  • USB PC Interface
Sensor  probe FERROUS NON-FERROUS
Working principle Magnetic induction Eddy current principle
Measuring range 0~1250um 0~1250um
0~49.21mils 0~49.21mils
Guaranteed tolerance (of reading) 0~850 um (± 3%+1um) 0~850 um(± 3%+1.5um)
850um~1250 um (± 5%) 850um~1250um (± 5%)
0~33.46 mils (± 3%+0.039mils) 0~33.46mils (± 3%+0.059mils)
33.46um~49.21mils (± 5%) 33.46um~49.21mils (± 5%)
Precision 0~50um (0.1um) 0~50um (0.1um)
50um~850um(1um) 50um~850um(1um)
850um~1250um(0.01mm) 850um~1250um(0.01mm)
0~1.968mils  (0.001mils) 0~1.968mils  (0.001mils)
1.968mils~33.46mils(0.01mils) 1.968mils~33.46mils(0.01mils)
33.46mils~49.21mils(0.1mils) 33.46mils~49.21mils(0.1mils)
Minimum curvature radius  1.5mm 3mm
Diameter of Minimum area 7mm 5mm
Basic critical thickness 0.5mm 0.3mm
Working temperature 0℃~40℃(32℉~104℉)  
Working relative humidity  20%~90%  
  • Batteries
  • USB Cable & Software
  • Calibration Iron and Aluminum plates
  • Precision Standard foils
  • Carrying Case
  • Test Report