Total Items 0

  • Email: info@cem-instruments.in
  • Phone: +91-33-22151376 / 22159759

Data Logger

Vibration Data Logger


This is a brand new 3-axis vibration data-logger. This device records shocks and vibration on all three axis (X, Y, Z). The data is stored in the built-in 4 Mb flash memory ready for uploading to a computer later. This device uses the USB interface to ensure compatibility with your Windows PC.

The DT-178A is engineered to record acceleration data of vibration. It records with time, 3-axis vibrations with peaks to provide a history of shock and vibration conditions. It also records the time when free-fall happens. It measures and computes real-time spectral data using FFT (Fast Fourier Transform) from 0 to 60 Hz.

This device is compact and portable. It comes with Windows compatible software and battery.

  • Records 3-axis shock
  • Comes with built-in accelerometers
  • Measures dynamic and static acceleration
  • Comes with free-fall detection mode
  • Designed to handle real time operation and FFT
  • Includes user settable trigger level
  • Comes with high speed USB 2.0 interface


Acceleration Sensor  MEMS Semiconductor
Acceleration Range  ±18 g
Acceleration Resolution 0.00625 g
Calibrated Accuracy ±  0.5g
Frequency Range 0 Hz ~ 60Hz
Data Memory  4Mbit FLASH (85764 peak acceleration samples and 210  freefall samples )
Data Format time stamped peak acceleration and freefall, average and peak vector sum
Sampling Rate 1  second to 24 hours
Power 3.6 V battery, specs : 14250 or 1/2AAA
Power Consumption 1 mA (average) recording, <15µA idle
Battery Life About 1000 hours
Computer Interface USB
Operation Temperature and Humidity 0 °C ~ 40°C 10 %RH ~ 90%RH
Storage Temperature and Humidity -10 °C ~ +60°C 10 %RH ~ 75%RH
Dimension The pedestal : 106mm x 56mm x 33.5mm The datalogger : 95mm x 28mm x 21mm
System Requirement Windows 2000 or Windows XP or Vista
Minimum Hardware Requirement 8 M EMS memory, 2M hard disk, a free USB jack
  • Instruction Manual
  • Li Battery
  • Software
  • USB Cable