0

Total Items 0

  • Email: info@cem-instruments.in
  • Phone: +91-33-22151376 / 22159759

Digital Clamp Meter


Professional AC, DC/AC T-RMS Auto-Ranging

DT-355

Our new family of true-RMS clamp meters provides a range of state of-the-art features to meet even the most demanding job requirements. All four of the new clamp meters have improved base features such as a large, backlit display, true-RMS standard, CAT IV safety rating and a durably constructed body. These have small bodies and jaw design for perfectly fitting in hand and in tight areas. The Backlit Display helps in working in dark areas.

 

  • 3 - 4 / 5 Digits 6000 counts Backlit LCD
  • Max./Min. Data Record
  • Data Hold Function
  • Relative Measuring Mode
  • Overload Protection of 1000V AC/DC on all ranges
  • Non Contact Voltage detector
  • Confirms to CE Standards
  • Complies with CAT III 600V
  • Measures AC Current, AC/DC Voltage
  • Also measures Resistance, Capacitance Frequency, Temperature and has Diode and contiunity test facility

 

Input Limits
Function Maximum Input
A AC 1000A
V DC, V AC 1000V DC/AC
Frequency, Resistance, Diode, Continuity, Capacitance Test 1000V DC/AC
Temperature (°C/°F) 1000V DC/ AC

 

Electrical Specifications

Function  Range & Resolution  Accuracy (% of reading)
AC Current (50/60Hz) 600.0 AAC ± (2.8 % + 8 digits)
1000 AAC ± (3.0 % + 8 digits)
AC Current (400Hz) 600.0 AAC ± (5.0 % + 10 digits)
1000 AAC ± (5.0 % + 10 digits)
DC Voltage 600.0 mVDC ± (0.8% + 2 digits)
6.000 VDC ± (1.5% + 2 digits)
60.00 VDC
600.0 VDC
AC Voltage (50-400Hz) 6.000 VAC ± (1.8% + 8 digits)
60.00 VAC
600.0 VAC
Resistance 600.0Ω ± (1.0% + 4 digits)
6.000KΩ ± (1.5% + 2 digits)
60.00KΩ
600.0KΩ
6.000MΩ ± (2.5% + 3 digits)
60.00MΩ ± (3.5% + 5 digits)
Capacitance 40.00nF ± (4.0% reading + 20 digits)
400.0nF ± (3% reading + 5 digits)
4.000μF
40.00μF
400.0μF ± (4.0% reading + 10 digits)
4000μF ± (5.0% reading + 10 digits)
Frequency Sensitivity: 15Vrms 10-10kHz ± (1.5% reading + 2 digits)
Temperature (type-K) (probe accuracy not included) -20.0 to 760.0°C ± (3%rdg + 5°C)
-4.0 to 1400.0°F ± (3%rdg + 9°F)

 

General Specifications

Clamp size Opening 1.5” (40mm) approx
Diode Test Test current of 0.3mA typical; Open circuit voltage 1.5V DC typical
Continuity Check Threshold <40
Max./Min. Records maximum and minimum data
Data Hold Freezes the displayed data
Relative Measurement allows reading with respect to a defined values
Test current < 0.5mA Two “1.5V” batteries
Overrange Indication “OL” is displayed
Measurements Rate 2 per second, nominal
Input Impedance 10MΩ (VDC and VAC)
Display 6000 counts Backlit LCD with Analogue Bargraph
AC Current 50-400Hz (AAC)
AC Voltage bandwidth 50-400Hz (VAC)
Operating Temperature 41 to 104°F (5 to 40°C)
Storage Temperature -4 to 140°F (-20 to 60°C)
Operating Humidity Max 80% up to 87°F (31°C) decreasing linearly to 50% at 104°F (40°C)
Storage Humidity <80%
Operating Altitude (2000meters)maximum 7000ft.
Over voltage Category III 600V
Battery One 9V Battery
Auto Power Off approx. 15 minutes
Dimensions/Weight 232 x 77 x 39mm/271g
Safety For indoor use and in accordance with Overvoltage Category II, Pollution Degree 2. Category II includes local level, appliance, portable equipment, etc., with transient overvoltages less than Overvoltage Cat. III

 

 

  • Carrying Case
  • Temperature Probe (to measure upto 260°C)
  • Testing leads, Battery
  • Instruction Manual
  • Test Certificate.