0

Total Items 0

  • Email: info@cem-instruments.in
  • Phone: +91-33-22151376 / 22159759

Infra Red Thermometer


Professional High Temperature Infra Red Thermometer with PC Interface

DT-8886H

CEM Professional Infra Red Thermometer for high temperature measurement is a very handy device to be used for all trouble-shooting engineers for taking temperature of areas that are inaccessible, moving targets and for surveillance of heat at various points in an area. Specially used for furnaces and high temperature areas. These have adjustable emissivity between 0.10 to 1.00 to cover various materials whose temperature is measured.

These have Distance to sighting ratio of 50:1 This means that from a distance of 50 inches the area whose temperature is being measured would have a diameter of 1 inch. Therefore if the target has a diameter of 2 inches the maximum distance from where the temperature can be measured would be 2 x 50 i.e. 100 inches

The instrument has a Red Dual Laser marker through which the user can pin point the exact area of the target whose temperature is to be measured. The temperature being measured is for the area between the two laser points.

This is a combination of Contact type Thermometer and a Non-contact type Thermometer. A K type thermocouple can be used to measure temperature in the contact mode. With the use of the instrument as a contact type thermometer, emissivity of any unknown material can also be depicted. It has data logging facility and USB PC Interface to see the reading online and for downloading the measured temperature for data analysis.

add to enquiry Download PDF View FAQ
  • Rapid detection function
  • Precise non-contact measurements
  • Dual laser sighting
  • Unique flat surface, modern housing design
  • Automatic Data Hold
  • Emissivity Digitally adjustable from 0.10 to 1.0
  • MAX MIN AVG DIF temperature displays
  • Backlight LCD display
  • Automatic selection range and Display Resolution 0.1°C(0.1°F)
  • Trigger lock
  • Set high and low alarms
  • Data Logger (LOG)
  • Transmit data to pc with USB 

Parameters

Temperature Range -50°C to 1850°C (-58°F to 3362°F)
D:S 50:1
Display Resolution 0.1° up to 1000°, 1° above 1000°
Respose Time 150mS
Spectral response 8 ~ 14um
Emissivity Digitally Adjustable from 0.10 to 1.0
Over Range Indication LCD will show "-------"
Polarity Automatic (no indication for positive polarity); Minus (-) sign for negative polarity
Diode laser output <1mW, Wavelength 630-670nm, Class 2(II) laser product
Operating Temperature 0 to 50°C (32 to 122°F)
Storage Temperature -20°C to 60°C (-4 to 140°F)
Relative Humidity 10%-90%RH operating, <80%RH storage
Power Supply 9V battery, NEDA 1604A or IEC 6LR61, or equivalent
Safety CE Comply with EMC

 

Accuracy

Assumes ambient operating temperature of 23 to 25°C (73 to 77°F)

-50°-20°C(-58°F-68°F) ±3°C(5.4°F)
20°C-500°C(68°F-932°F) ±1.0% ±1.0°C(1.8°F)
500°C - 1000°C (932°F - 1832°F) ±1.5% ±2.0°C(3.6°F)
1000°C -1850°C(1832°F-3362°F) ±2%

 

Repeatability

-50°-20°C(-58°F-68°F) ±1.5°C(2.7°F)
20°C - 1000°C (68°F-1832°F) ±0.5% or 0.5°C(0.9°F)
1000°C -1850°C(1832°F-3362°F) ±1%

 

When used as Contact type Thermometer

Parameters

Temperature Range -50 to 1370°C (-58°F to 2498°F)

 

Accuracy

-50 to 1000°C  ±1.5% ±3.0°C(5°F)
1000 to 1370°C  ±1.5% ±2.0°C(3.6°F)
Resolution 0.1° up to 1000°, 1° above 1000°

 

Repeatability

-50 to 1370°C (-58°F to 2498°F) ±1.5% of reading

 

  • Hard Carrying Case
  • USB Interface Cable
  • Software
  • Instruction manual
  • Battery
  • Test Certificate