CEM Professional Infra Red Thermometer for high temperature measurement is a very handy device to be used for all trouble-shooting engineers for taking temperature of areas that are inaccessible, moving targets and for surveillance of heat at various points in an area. Specially used for furnaces and high temperature areas. These have adjustable emissivity between 0.10 to 1.00 to cover various materials whose temperature is measured.

These have Distance to sighting ratio of 50:1 This means that from a distance of 50 inches the area whose temperature is being measured would have a diameter of 1 inch. Therefore if the target has a diameter of 2 inches the maximum distance from where the temperature can be measured would be 2 x 50 i.e. 100 inches

The instrument has a Red Dual Laser marker through which the user can pin point the exact area of the target whose temperature is to be measured. The temperature being measured is for the area between the two laser points.

This is a combination of Contact type Thermometer and a Non-contact type Thermometer. A K type thermocouple can be used to measure temperature in the contact mode. With the use of the instrument as a contact type thermometer, emissivity of any unknown material can also be depicted. It has data logging facility and USB PC Interface to see the reading online and for downloading the measured temperature for data analysis.