- 3 - 4 / 5 Digits 6000 counts Backlit LCD
- Max./Min. Data Record
- Data Hold Function
- Relative Measuring Mode
- Overload Protection of 1000V AC/DC on all ranges
- Non Contact Voltage detector
- Confirms to CE Standards
- Complies with CAT III 600V
- Measures AC Current, AC/DC Voltage
- Also measures Resistance, Capacitance Frequency, Temperature and has Diode and contiunity test facility
| Input Limits |
| Function |
Maximum Input |
| A AC |
1000A |
| V DC, V AC |
1000V DC/AC |
| Frequency, Resistance, Diode, Continuity, Capacitance Test |
1000V DC/AC |
| Temperature (°C/°F) |
1000V DC/ AC |
Electrical Specifications
| Function |
Range & Resolution |
Accuracy (% of reading) |
| AC Current (50/60Hz) |
600.0 AAC |
± (2.8 % + 8 digits) |
| 1000 AAC |
± (3.0 % + 8 digits) |
| AC Current (400Hz) |
600.0 AAC |
± (5.0 % + 10 digits) |
| 1000 AAC |
± (5.0 % + 10 digits) |
| DC Voltage |
600.0 mVDC |
± (0.8% + 2 digits) |
| 6.000 VDC |
± (1.5% + 2 digits) |
| 60.00 VDC |
| 600.0 VDC |
| AC Voltage (50-400Hz) |
6.000 VAC |
± (1.8% + 8 digits) |
| 60.00 VAC |
| 600.0 VAC |
| Resistance |
600.0Ω |
± (1.0% + 4 digits) |
| 6.000KΩ |
± (1.5% + 2 digits) |
| 60.00KΩ |
| 600.0KΩ |
| 6.000MΩ |
± (2.5% + 3 digits) |
| 60.00MΩ |
± (3.5% + 5 digits) |
| Capacitance |
40.00nF |
± (4.0% reading + 20 digits) |
| 400.0nF |
± (3% reading + 5 digits) |
| 4.000μF |
| 40.00μF |
| 400.0μF |
± (4.0% reading + 10 digits) |
| 4000μF |
± (5.0% reading + 10 digits) |
| Frequency Sensitivity: 15Vrms |
10-10kHz |
± (1.5% reading + 2 digits) |
| Temperature (type-K) (probe accuracy not included) |
-20.0 to 760.0°C |
± (3%rdg + 5°C) |
| -4.0 to 1400.0°F |
± (3%rdg + 9°F) |
General Specifications
| Clamp size |
Opening 1.5” (40mm) approx |
| Diode Test |
Test current of 0.3mA typical; Open circuit voltage 1.5V DC typical |
| Continuity Check |
Threshold <40 |
| Max./Min. |
Records maximum and minimum data |
| Data Hold |
Freezes the displayed data |
| Relative Measurement |
allows reading with respect to a defined values |
| Test current < 0.5mA |
Two “1.5V” batteries |
| Overrange Indication |
“OL” is displayed |
| Measurements Rate |
2 per second, nominal |
| Input Impedance |
10MΩ (VDC and VAC) |
| Display |
6000 counts Backlit LCD with Analogue Bargraph |
| AC Current |
50-400Hz (AAC) |
| AC Voltage bandwidth |
50-400Hz (VAC) |
| Operating Temperature |
41 to 104°F (5 to 40°C) |
| Storage Temperature |
-4 to 140°F (-20 to 60°C) |
| Operating Humidity |
Max 80% up to 87°F (31°C) decreasing linearly to 50% at 104°F (40°C) |
| Storage Humidity |
<80% |
| Operating Altitude (2000meters)maximum |
7000ft. |
| Over voltage |
Category III 600V |
| Battery |
One 9V Battery |
| Auto Power Off |
approx. 15 minutes |
| Dimensions/Weight |
232 x 77 x 39mm/271g |
| Safety |
For indoor use and in accordance with Overvoltage Category II, Pollution Degree 2. Category II includes local level, appliance, portable equipment, etc., with transient overvoltages less than Overvoltage Cat. III |
- Carrying Case
- Temperature Probe (to measure upto 260°C)
- Testing leads, Battery
- Instruction Manual
- Test Certificate.
