- True RMS for accurate readings of non-sinusoidal waveforms
- Built-in non-contact Voltage detector with LED alert
- 2.0” (52mm) jaw size for conductors up to 500MCM
- Dual 40,000/4000 count, backlit LCD display
- Includes 40,000 Counts Digital Multimeter functions
- Inrush function captures transients during motor startups
- Relative Mode for Capacitance Zero and Offset Adjustment
- Data Hold, Peak Hold, MIN/MAX, and Auto Power Off
- Low Battery Indication : Battery symbol is displayed
- Over-range Indication : ‘OL’ display
- Measurement Rate : 2 readings per second, nominal
- Peak Detector : >1ms
- Thermocouple Sensor : Type K thermocouple required
- Input Impedance : 10MW (VDC and VAC)
- AC Bandwidth : 50 to 400Hz (AAC and VAC)
- AC Response : True rms (AAC and VAC)
- Crest Factor : 3.0 in 40A and 400A ranges, 1.4 in 1000A range (50/60Hz and 5% to 100% of range)
- Operating Temperature : 5°C to 40°C (41°F to 104°F)
- Storage Temperature : -20°C to 60°C (-4°F to 140°F)
- Operating Humidity : Max 80% up to 31°C (87°F) decreasing linearly to 50% at 40°C (104°F)
- Storage Humidity : <80%
- Operating Altitude : 7000ft. (2000meters) maximum.
- Battery : One (1) 9V Battery (NEDA 1604)
- Auto power OFF : After approx. 30 minutes
- Dimensions & Weight : 11.57x4.13x1.85” (294x105x47mm); 18.9 oz. (536g)
- Safety : For indoor use and in accordance with the requirements for double insulation to IEC1010-1 (2001): EN61010-1 (2001) Overvoltage Category III 600V and Category II 1000V, Pollution Degree 2.
- Approvals : CE
| Function |
Range |
Resolution |
Accuracy (% of reading) |
| DC Current |
400.00 ADC |
0.01A |
± (2.5% +30digits) |
| 1500.0 ADC |
0.1A |
± (2.5% +30digits) |
| Function |
Range |
Resolution |
Accuracy (% of reading) |
AC Current
True RMS
(50Hz to 60 Hz) |
400.00 ADC |
0.01A |
± (3% +50digits) |
| 1500.0 ADC |
0.1A |
± (3% +50digits) |
| All AC voltage ranges are specified from 5% of range to 100% of range |
| Function |
Range |
Resolution |
Accuracy (% of reading) |
| DC Voltage |
400.00 mVDC |
0.01mV |
± (0.1% + 5 digits) |
| 4.0000VDC |
0.0001V |
± (0.1% + 4 digits) |
| 40.000 VDC |
0.001V |
| 1000.0 VDC |
0.1V |
± (0.5% + 4 digits) |
| Function |
Range |
Resolution |
Accuracy (% of reading) |
| AC Voltage True RMS (50 Hz to 1000 Hz) |
400.0 mVAC |
0.1mV |
± (0.8% + 40 digits) (50/60Hz) |
| 4.000 VAC |
0.001V |
± (1.0% + 30 digits) |
| 40.00 VAC |
0.01V |
|
| 750 VAC |
1V |
|
All AC voltage ranges are specified from 5% of
range to 100% of range |
| Function |
Range |
Resolution |
Accuracy (% of reading) |
| Resistance |
400.00 Ω |
0.01Ω |
± (0.5% + 9 digits) |
| 4.0000KΩ |
0.0001KΩ |
± (1.0% + 4 digits) |
| 40.000KΩ |
0.001KΩ |
| 400.00KΩ |
0.01KΩ |
| 4.0000MΩ |
0.0001MΩ |
± (2.0% + 30 digits) |
| 40.000MΩ |
0.001MΩ |
± (3.0% + 50 digits) |
| Function |
Range |
Resolution |
Accuracy (% of reading) |
| Capacitance |
400.0nF |
0.1nF |
±(3.5% reading + 40digits) |
| 4000nF |
1nF |
±(3.5% reading + 10digits) |
| 40.00µF |
0.01uF |
| 400.0µF |
0.1uF |
| 4.000mF |
0.001mF |
±(3.5% reading + 20 digits) |
| 40.00mF |
0.01mF |
±(5% reading + 30 digits) |
| Function |
Range |
Resolution |
Accuracy (% of reading) |
| Frequency |
40.000 Hz |
0.001Hz |
±(0.3% reading + 2 digits) Sensitivity: 10Vrms min 5kHz~15kHz :40Vrms min @ 20% to 80% duty cycle |
| 400.00 Hz |
0.01Hz |
| 4.0000KHz |
0.0001kHz |
| 40.000KHz |
0.001kHz |
| 400.00KHz |
0.01kHz |
| 4.0000MHz |
0.0001MHz |
| 40.000MHz |
0.001MHz |
Sensitivity: 0.8V rms min. @ 20% to 80% duty cycle and
<100kHz; 5Vrms min @ 20% to 80% duty cycle and >
100kHz. |
| Function |
Range |
Resolution |
Accuracy (% of reading) |
| DC Current |
10.0 to 95.0% |
0.10% |
±(0.5% reading + 2 digits) |
| Pulse width: 100µs - 100ms, Frequency: 10Hz to 100kHz; |
| Sensitivity:10Vrms min. |
| Function |
Range |
Resolution |
Accuracy (% of reading) |
| Temp (type-K) (probe accuracy not included) |
-100.0 to 1000.0°C |
0.1°C |
±(1.0% reading + 2.5°C) |
| -148.0 to 1832.0°F |
0.1°F |
±(1.0% reading + 4.5°F) |
| (probe accuracy not included) |
Continuity check : Threshold 50W; Test current < 0.5mA
Diode test : Test current of 0.3mA typical; Open circuit voltage 2.8VDC typical
- Instruction manual
- test leads
- general purpose Type K bead wire temperature probe
- 9V battery
- carrying case
- Test Certificate
